|
Tool Box
Available with metal and plastic boxes
Metal boxes: durable and heavy, use for a long time may has rust. Suitable for hard work.
Plastic boxes: has lots of space, more functions and lightweight. Available for both light
and hard work uses. If you have a lot of tools, recommend you to use a plastic box with
wheels. So you don’t need to carry it, just push it while working. Or you put a plastic box
on a cart.
|
Mains Tester Screwdriver
Used to determine the presence oe absence of an elecricity voltage. Choose an insulating
material on either side of the handle and shank, which made of steel. Choose the right
voltage for our homes, which is 200 – 250 Volts. If you use a screwdriver with 80 -125
Volts, you may feel an electricity leak. How to use a mains tester screwdriver correctly,
put the tip of screwdriver on an object to test and use your fingers to hold the handle or
the clip of screwdriver to let electricity circulates. Most importantly, don’t put your
shoes or stand near an insulate area, electric current may not circulates. Also, do not use
this screwdriver with high voltage.
|
|
Standard
Screwdriver and Phillips Screwdriver
Observe the
structure of a screwdriver: the handle, shank, and blade. The handle of a screwdriver should
fit with the hand. Make sure it is not slippery. Also, make sure it works well, otherwise,
your hand can get tired easily. Hexagon plastic screwdriver which is available for all
shops. This type of screwdriver makes your hand gets tired easily. There are 2 types of
shanks: round and square shanks. Round shank is for light craftsman work. Square shank is
for hard craftsman work. You can also use plier or wrench to help increases torque. Good
quality of screwdriver must have the tip of the blade made of steel, which is strong and
durable. The price is quite expensive. Some brands, the tip of screwdriver is black, which
composed of metal with high carbon, and hard. As for typical screwdriver made of chromium is
cheaper and usually damage easily.
|
|
Multi-Purpose Saw
For people working with wood and metal seriously, you should have saw for both wood and
metal craftsman works. But if you do miscellaneous work, recommend to use a multi-purpose
saw which is compact. It can be used to cut various kind of materials such as woods,
aluminum, pvc pipes, nail, tiles and glass bottles. Before you buy, you should try to hold a
saw, see whether it fits your hand well. Make sure the blade is locked well and the saw is
strong enough, not bend easily.
|
Hacksaw
Some craftsman work may require hacksaw to cut big pieces of wood. Cutting craftsman work is
not easy as using a scissor to cut paper. Hacksaw is another tool that every home should
have, use for cutting items. A hand saw with rectangular metal frame and handle, the blade
is attached to the saw, to easy cutting.
|
|
|
Chisel
Use for drilling threaded holes. A chisel is thick and wide, less sharp than a parting
chisel. Using a chisel, you need a hammer to help. Hold a chisel handle in one hand, and
hold a hmmer with another hand and gradually strike the chisel on the wood to cut off pieces
of wood little by little. Continue cutting off wood to get a specified depth.Parting chisel
or v-chisel is for making the surface of wood smoother. It composed of blade and handle. The
blade is made of flat steel which is very sharp. Hold a chisel handle in one hand, and
another hand grab on the ferrule of the chisel to control it.
|
T-Square
T-Square is a techinal drawing instrument use as a guide for drawing on craftsman work
before cutting or install it. There are 2 type: 1. Solid Square or Try Square is for
measuring 90 degrees angle which cannot adjust the angle. 2.Set Square is for measuring
adjustable angles. Set Square is for creating, checking and cutting angles on woods,
cornice, corner wood, and wooden pole with the right angle.
|
Steel Ruler
Use for measuring lines straightly. It is a tool which everyone is familar with. Mostly use
for measuring and drawing lines for craftsman work.
|