1-800-28-2268
Add to wishlist
HP_UNIT: EA, HP_UPC: 2900002500783
DULUX

MOLD AND ALGAE REMOVER DULUX WEATHERSHIELD MOULD WASH 3 L

SKU: 250078
unit: EA
308 RM
297 RM
20 units sold
  • Pure silicone resin solution offers reliable quality along with long-lasting life.
  • Ideal for eliminating mold and algae and protecting water absorption
  • Low odor, easy to apply, and applicable on various surfaces such as concrete, plaster, tiles, etc.
itemQty: 30.00
Quantity:
debug: itemQty = {SUMQTYBKK=33.0, UNIT=EA, SUMQTYALL=165.0, SUMQTYBASE=33.0, SUMQTYDUM=0.0, CREATEDATE=1571130696000, SUMQTYS888=0.0, STATUS=1, LASTUPDATE=1649214490883, SUMQTYDC01=0.0, MARKFORDELETE=0, SUMQTYDC02=9.0, PARTNUMBER=250078, SUMQTYDCS=9.0}
Check Availability for Store Pick up
Promotion & Discount
Special Offers:
Similar Products
SKU: 249397
NIPPON PAINT V-BIOWASH 1L FUNGUS & ALGAE REMOVAL
140 130 RM
75 units sold
SKU: 82320
MASONRY WATER REPELLANT DULUX SILICONE R 221 1GAL
1,174 1,151 RM
2 units sold
SKU: 1016454
TOA 113 1L CLEAN
189 109 RM
268 units sold
SKU: 1153454
MOLD AND FUNGUS REMOVER CAPTION MOLD KILLER ANTI V...
519 RM
20 units sold
SKU: 277079
TOA 113 5L MILDEW PROTECTION LUBRICANT
790 590 RM
68 units sold
SKU: 1047146
MOLD AND ALGAE CLEANER BESBOND 5L
800 688 RM
4 units sold
SKU: 267919
OLD PLASTER PRIMER TOA 4SEASONS SUPER PRIMER 1GL
790 650 RM
38 units sold
Product Information Specifications

MOLD AND ALGAE REMOVER DULUX WEATHERSHIELD MOULD WASH 3 L

This mold and algae remover, WEATHERSHIELD MOULD WASH, from DULUX is formulated from pure silicone resin for high elongation and effectiveness. It penetrates deeper down under the surface to inhibits mold and algae buildups. The solution also offers protection to the applied surface, allowing it to look new and clean as always. This remover is applicable on most interior and exterior surfaces such as concrete, masonry, plaster, etc.

Properties
Pure silicone resin solution offers reliable quality along with long-lasting life.
Ideal for eliminating mold and algae and protecting water absorption
Low odor, easy to apply, and applicable on various surfaces such as concrete, plaster, tiles, etc.
Product Usage
For eliminating mold and algae on various surfaces such as concrete, plaster, tiles, etc.
Apply the remover onto the surface with mold or algae and leave for 24 hours before rinsing it with clean water.
Product Tips
Please read the instructions carefully.
For deeper removal action, leave 2-3 hours after the first round of application. Scrub the mold and algae off the surface then apply the remover for another round.
Cautions
Do not modify or misuse the product.
Do not use any acidic-alkaline agents to clean the product.
Keep in a dry place and out of reach of children.
Keep away from all sources of heat and flame.
Do not ingest or inhale.
The paint should be completely used up once opened.
Do not expose to direct sunlight for too long as it may cause damages to the product.
Use of personal protective equipment and clothing is recommended to prevent irritation.
In case of direct physical contact, rinse mediately with clean water.
In case of contact with eyes, rinse mediately with clean water and seek medical attention immediately.
MOLD AND ALGAE REMOVER DULUX WEATHERSHIELD MOULD WASH 3 L
DULUX

MOLD AND ALGAE REMOVER DULUX WEATHERSHIELD MOULD WASH 3 L

SKU: 250078
308 297 RM